Wire Manufacturers

Register · industrial and utility cable

Power and control cable manufacturers

Power and control cable runs a plant and feeds a grid: tray cable to motors, multi-conductor control and instrumentation cable, and shielded medium-voltage cable for utilities. These are the companies NEMA lists under its Power & Control Cable section.

The roster

Listed alphabetically. NEMA says this section covers both signal cable and high-voltage utility cable, which are made on very different equipment. A row does not say which end of that range a member works at, and some members of the section are better known for connection and control hardware than for cable.

16 companies, in alphabetical order. Source: the member roster NEMA publishes for its Power & Control Cable section, read on 2026-10-07. A row records that listing and nothing else.
No.CompanyAlso listed underWhere to check
01AtkoreNEMA profile
atkore.com
02CerrowireNEMA profile
cerrowire.com
03Champlain Cable CorporationNEMA profile
champcable.com
04Freeport-McMoRanNEMA profile
fcx.com
05Legrand, North AmericaNEMA profile
legrand.us
06NexansNEMA profile
nexans.ca
07The Okonite CompanyNEMA profile
okonite.com
08Phoenix ContactNEMA profile
phoenixcontact.com
09Prysmian GroupNEMA profile
prysmiangroup.com
10RSCC Wire & Cable LLCNEMA profile
r-scc.com
11SEA Wire and Cable, Inc.NEMA profile
sea-wire.com
12Service Wire CompanyNEMA profile
servicewire.com
13Southwire Company, LLCNEMA profile
southwire.com
14Tatung Electric Company of AmericaNEMA profile
tatungelectric.com
15Weidmüller, Inc.NEMA profile
weidmuller.com
16Xignux CorporativoNEMA profile
xignux.com

Read this before using the list

Utility cable is bought against the utility’s own specification and an approved-manufacturer list the utility keeps. This sheet is a way to find names, not a substitute for that list.

Three products under one heading

Low-voltage power and control cable is the workhorse of industrial wiring: two to dozens of insulated conductors under a common jacket, laid in cable tray or pulled in conduit, rated 600 V or 2000 V. Instrumentation cable carries signals, not power, so its pairs and triads are shielded, individually or overall, to keep noise out. Medium-voltage cable, from 5 kV up, is a different object: the insulation is extruded together with semiconducting layers in a single clean pass, under a metallic shield, because at those voltages a void the size of a grain of dust becomes the place the cable eventually fails.

The standards a specification will cite

ProductConstruction standardListing standard
Power cable to 2000 VICEA S-95-658 / NEMA WC 70UL 1277 for Type TC tray cable
Control and instrumentationICEA S-73-532 / NEMA WC 57UL 1277; UL 2250 for Type ITC; UL 13 for Type PLTC
Shielded power, 5 to 46 kVICEA S-93-639 / NEMA WC 74UL 1072 for Type MV
Utility distribution cableThe ICEA utility standards, with AEIC specificationsThe utility’s own approval

The pairing matters. The ICEA and NEMA document says how the cable is built and tested. The UL standard is what a testing laboratory lists it to, and the listing is what lets an inspector accept it under the National Electrical Code. A cable can meet one without the other. Revisions change both, so cite the edition.

Checking a power or control cable maker

  • Ask for the listing by cable type. A company listed for tray cable is not thereby listed for medium-voltage cable. Search the laboratory’s directory for the type on your drawing.
  • Ask for the flame test the installation needs. Tray cable is rated by vertical-tray flame tests, and some sites require a more severe one than the basic listing.
  • For medium voltage, ask for production test reports. Every shipping length is tested for partial discharge and withstand voltage, and the report is tied to the reel.
  • Ask how the price moves with copper. Quotes for heavy cable usually carry a metal adjustment clause. Two quotes are comparable only when the copper basis is the same.
  • Confirm lengths and reels. Maximum continuous length, reel dimensions and weight decide whether a pull can be made without a splice.

The general method is in Qualifying a wire manufacturer, and the families are compared side by side in Wire types, and who makes which.

Sheet last checked 2026-10-07